© by WilTec Wildanger Technik GmbH
Seite 3
http://www.wiltec.info
WARNUNG
:
Read all the safety guidelines and instructions.
Omission or neglecting of the safety rules and
regulations
can lead to electric shocks, burns and severe injuries.
Please keep the safety regulations in case you need them in the future.
Resistance
The vacuum cleaner has a stainless steel container.
The suction hose is from metal. The device is
designed for aspirating ashes and metal particles.
The vacuum cleaner is ideal for fireplaces, grills,
milling and boring machines.
Please see the handling hints
Clean – easy - fast, this is how you clean nowadays
grills & fireplaces
.
The 1000 Watt engine power of
this ash vacuum cleaner ensures an enormous
suction force for ashes and soot. This special
vacuum cleaner is suitable for removing warm and
cold ashes (
without embers
). The filter prevents
the infiltration of dusts or ashes to the engine. An
anti-inflammatory primary filter is already pre-
installed.
Ansaugschalauch= suction hose
Lufteinlass=air intake
Anschluss für Ansuagschlauch= connection for suction hose
Technical data:
Power consumption
1000 W
Voltage/Frequency
220-240V/50Hz
Capacity
20 l
Suction power
18kpa
Hose
1m long, flexible
Dimensions
300x370mm
Weight
3,75 kg
Electrical connection
•
The electrical connection takes place via a safety socket 230 V ~ 50 Hz. Fuse protection at
least 10 Ampere.
•
The vacuum cleaner is turned on/off with a built-in ON-/OFF-switch.
Use:
•
Place the device on a flat surface. Make sure that the filters are correctly inserted.
•
Check if the ashes are really cold and if there are still embers. Plug the power plug of the
vacuum cleaner in a suitable socket. Turn on the vacuum cleaner.
•
Suck only the ashes.
•
As soon as the fireplace cleaning is ended, turn off the device and unplug it.
•
After every cleaning we recommend removing the ashes from the container and cleaning the
filter with a brush. After approx. five cleanings the filter should be cleaned thoroughly (do not
wash).
•
If the filter is completely clogged while using, the engine switches off automatically due to
overheating. In this case turn off the device, unplug the cable and clean the filter thoroughly.
•
The engine starts automatically, once it is cooled (after ca. 30 min.).
