© by WilTec Wildanger Technik GmbH
Item 62889, 63040
Page 3
http://www.toboli.com
07 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Parts list
Name
62889
63040
Cart frame (quantity)
1
1
Air wheel (quantity)
2
2
Quick release pin (quantity)
2
2
Tie down strap (quantity)
1
2
Assembly
1.
Unfold the cart frame and remove the quick-release pins from the axle by flipping the ring up-
wards and outwards.
2.
Slide one wheel onto each side of the axle.
3.
Secure the wheels by inserting the quick-release pins into the holes on the ends of the axle.
4.
Flip the R-ring over the ends of the axle to lock the wheels.
Use
1.
Unfold the cart frame with the kickstand pointing in the direction in which the board(s) will be
pulled.
2.
Place the board(s) onto the cart with its/their weight centred on the cart.
3.
Use the tie-down strap(s) to secure the board(s) to the cart. Do not overtighten the strap(s).
4.
Lift the end of the board(s), retract the kickstand, and roll the cart by pulling or pushing the
board(s) at walking speed.
5.
After use, clean the cart with fresh water and dry it lest it rust.
Warnings!
•
Do not exceed the weight capacity of 45
kg.
•
Only roll the cart at walking speed. Do not tow the cart with motorised vehicles.
•
Not for use by unsupervised children.
Technical specifications
62889
63040
Size
(
㎝
)
73×45×60
48×63×36
Weight
(
㎏
)
4.05
4.4
Max. width of board(s)
(
㎝
)
16
16
Number of boards to be placed on the
trolley
1
2
Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part,
of this instruction manual require the written permission of WilTec Wildanger Technik GmbH.
