© by WilTec Wildanger Technik GmbH
Seite 15
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
13> With abnormal alarm function. This pump can warn you of various abnormal
problems in time.
INSTALLATION
1> Notify your dealer immediately if there are external damages.
2> Compare the Voltage and frequency of your electrical circuit with the data on the
model plate, these data must agree.
3> Connect the pipeline if needed. (Attention: the piping system shall not have bub-
ble.) Hose connection diagram is as follows.
This product have variety of outlets, you can select according to the size. Loosen the
nut in clockwise direction, connect the hose, Tighten the nut in anti-clockwise direc-
tion.
4> Attention: the pump must installed below the water level 20cm at least, the sur-
face must firm and horizontal.
5> Do not place the pump directly in the ponds floor that have mud, place it on a
raised surface.
6> Connect the pump with the controller of four core wire (PIC 1), lock the nut as
shown in PIC 2
