© by WilTec Wildanger Technik GmbH
Seite 9
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
1. exempt the locking clip
2. The erect dick screw
For an effective use, we recommend you only to grease the screw.
effect:
3. The locking clamp reset so that the clapper bolt remains locked upright.
4. The dick in the clockwise direction so that turning the mower lifter comes up.
The lifting of a lawnmower:
Position The mower lift on a Flacken and hard ground.
1. The mower astride put on the jack with the lower side along the transverse reinforcement pressed
(on the opposite side of the clapper screw)
,
Note: With respect to the Rider position on the back of the mower lift. The rear wheels along the trans-
verse reinforcement (5) is pressed.
2. The dick in the clockwise direction so that turning the mower lift 2 to 3 cm high comes. Make sure
the good balance of the mower on the lifter.