© by WilTec Wildanger Technik GmbH
Item 909378pro
Page 3
12 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
General safety instructions
ATTENTION:
The use of this device is only allowed with a fault current protection switch with a triggering nominal
current up to 30
mA (according to VDE 0100
Article 702 and 738).
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory, and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or follow the instructions made by this person on how to correctly
use the device. Children should be supervised to ensure that they do not play with the device.
During operation, parts of the device have temperatures between 200
℃
and 480
℃
. Therefore, per-
sonal injuries or material damage inside the work area might happen in case the unsoldering station is
not handled with care.
Obey the following principles when working with this device:
•
After opening the parcel, check if every individual part of the device is in good condition or if you
can detect visible damage caused by transport. If there are damages visible, do not operate the
device, but
immediately
contact your vendor.
•
Switch off the device and pull out the plug before moving it.
•
Avoid exposing parts of the device to too high a mechanical stress (shocks, pushes, etc.).
ATTENTION:
•
Perform a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•
Only use the device accordingly to the intended purpose stated in this manual.
•
You are responsible for the safety of the working zone.
•
If the cable or the plug is damaged due to external influences, the cable must not be repaired,
but must be replaced with a new one.
•
The voltage of 230
V AC indicated on the nameplate of the device must match the existent
mains voltage.
•
Never lift, carry, or fix the device by using the power cable.
•
Make sure that the electrical plug connection is protected from flood and moisture.
•
Always unplug the device before working on it.
•
Avoid exposing the device to direct jets of water.
•
The user is responsible for complying with local safety and mounting regulations. If necessary,
ask a qualified electrician.
•
In case of device failure, repairs can only be carried out by an electrician.
WARNING:
Read all safety precautions and instructions.
Failure to obey the safety precautions and instructions
might cause an electric shock, a fire, and/or severe injuries. Keep all safety precautions and instructions
for future use.
