Intended use
The grinding machine is suitable for sanding primed drywall constructions, ceilings and walls indoors
and outdoors as well as removing carpet residues, layers of paint, coverings, adhesives and loose
plaster. The user is responsible for damage and accidents caused by improper use.
Safety instructions
General safety instructions for electrical devices
Read all safety instructions and instructions in this manual. Failure to follow the instructions
and the instructions contained therein could result in electric shock, fire and/or serious injury.
Keep this manual in a safe place so that you can refer to it at any time.
The term “electrical appliance” in the warnings refers to your mains operated (wired) electrical
appliances or battery operated (cordless) electrical appliances.
Safety in the work area
Keep your work area clean and well lit. Untidy or dark work areas increase the risk of injury.
Never operate electrical devices in an explosive or flammable atmosphere, e. g. in the vicinity
of flammable liquids, gases or dust. Electrical devices can generate sparks that can ignite
flammable substances and gases.
Keep children and bystanders away from your work area while you are using the device. Dis-
tractions can cause you to lose control of the device.
Electrical Safety
Power plugs must match the outlet. Never make changes to the power plug. Do not use ad-
apter plugs with grounded power tools. Unmodified plugs and matching sockets reduce the
risk of electric shock.
Avoid body contact with earthed surfaces, e. g. pipes, refrigerators and heaters. Contact with
earthed surfaces increases the risk of electric shock.
Do not expose the device to rain or a damp environment. If water gets into an electrical appli-
ance, it increases the risk of electric shock.
Never handle the power cord with force. Never use the power cord to carry, pull or unplug the
device.
Keep the power cord away from heat, oil, sharp edges and moving parts. Damaged or tangled
power cords increase the risk of electric shock.
If you want to use an electrical device outside, make sure that your extension cord is suitable
for outside areas in order to minimize the risk of electric shock.
If use in a damp environment cannot be prevented, use a protected power supply with a FI cir -
cuit breaker. Using a residual current circuit breaker reduces the risk of electric shock.
Personal safety
Pay all your attention to what you are doing while operating an electrical appliance. Never use
an electrical appliance when you are tired or under the influence of alcohol, drugs, or medica-
tion affecting your consciousness. A moment of inattention during operation can result in seri-
ous injury.
Wear protective equipment such as protective goggles, dust mask, non-slip shoes, hardhat
and hearing protection in order to minimize the risk of injury.
Avoid unintentional starting. Make sure that the switch is in the off state before connecting the
device to the mains or another power source. Carrying power tools with your finger on the
switch or carrying power tools with the switch on will result in accidents.
© by WilTec Wildanger Technik GmbH
Item 62531
Page 6
http://www.WilTec.de
http://www.aoyue.eu
01 2021
-1
