Cutting operation
Metal blade usage
- Always cut by guiding the head from your
right to left.
- A metal blade cut best up to the point 1/3
from the edge. Use that area for cutting
shrubs tough and thick weeds. For cutting
young grass you can use up to 2/3 from the
tip of blade.
- Adjust the engine speed according to the
cutting
objects. Cutthe young grass
at middle speed and cut shrubs or tough and
thick weeds at high speed.
(1) For boughs and trees
(2) For grass and weeds
(3) Direction of cutting
(4) Direction of rotation
Operating at low speed make it easier for
grass weeds or twigs to caught up in the
blades and also it mokes the shaft and clutch
wear down more quickly.
Nylon cutter usage
- Nylon cord consumes large power. Please note that the engine rotation
should be in
operation
- Nylon cutter cut grass with the power of cord rotation. If you try to cut grass
for the
length of cord at one 50% as large as when using metal blade. time
rotation speed
becomes lower due to resistance and you cannot cut well. In
case of large resistance get the nylon cutter away from grass once make the rota-
tion speed higher and cut a
small amount of grass at one time.
- If you try to cut grass by swinging the brush cutter in the reverse way (from
left to right) scraps fly in the direction away from the body, so you can avoid getting
your clothes dirty.
© by WilTec Wildanger Technik GmbH
Seite 33
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
