© by WilTec Wildanger Technik GmbH
Item 61492
Page 3
05 2021
-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
General warnings and safety information
Safety in the work area
•
Make sure that your work area is clean and well-lit. Untidy and dark work areas increase the
risk of accidents.
•
Do not use the tool in potentially explosive areas where there are flammable liquids, gases, or
dust. Power tools generate sparks that can ignite the dust or fumes.
•
Keep children and other people away from the work area while operating the device. Distrac-
tions can make you lose control of the device.
Electrical safety
•
The plug must match the socket. It must not be changed under any circumstances. Do not
connect an earthed electrical device to the power supply using a adaptor. An unchanged plug
and the matching socket reduce the risk of electric shock.
•
Avoid body contact with earthed surfaces such as pipes, radiators, stoves, and refrigerators.
The risk of electric shock increases when your body is earthed.
•
Do not expose an electrical device to moisture or rain. Water entering an electrical device in-
creases the risk of electric shock.
•
Do not use the power cord to carry an electrical device, to hang it up or to pull the plug out of
the socket. Keep the cord away from heat, oil, sharp edges, or moving parts. Damaged or tan-
gled cables increase the risk of electric shock.
•
When working outdoors, an extension cord approved for outdoor work must be used. Using
such a cable will reduce the risk of electric shock.
•
If the use of the electrical device in a humid environment is unavoidable, install a residual current
circuit breaker. Using such a switch will reduce the risk of electric shock.
Personal safety
•
Be vigilant, focus all your attention on what you are doing, and use common sense while work-
ing. Do not use the electrical device when you are tired or under the influence of alcohol, drugs,
or medicine. A moment of inattention leads to the device no longer being controllable, which
can result in serious injuries.
•
Put on protective equipment and always wear protective goggles. Protective equipment such
as a dust mask, non-slip safety shoes, a hard hat, or hearing protection reduce the risk of injury
depending on the working conditions.
•
Avoid unintentional use of the electrical device. Make sure that the switch is in the off position
before connecting it to power and/or a battery, picking it up, or carrying it. When you carry the
device, make sure that your finger is not on the on/off switch; do not plug it in with the switch
on. Otherwise, an accident could occur.
•
Remove any adjustment tools before switching on the device. An adjustment tool still attached
to a rotating part of the device can cause serious injury.
•
Avoid an unnatural posture. Stand safely and always keep your balance. This makes the device
easier to control if something unexpected happens.
•
Wear suitable clothing. Avoid loose clothing, do not wear jewellery. Keep hair, clothing, and
gloves away from moving parts. Loose clothing, jewellery, or long hair can get caught in moving
parts.
•
If a dust extractor or collector can be installed, ensure that it is connected and used correctly.