© by WilTec Wildanger Technik GmbH
Item 61328
Page 3
11 2021
-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•
Modifications due to technical progress can be made by the manufacturer without advance no-
tice and may not be considered yet in this user’s manual.
•
Before use, check the device for completeness, functionality, and tightness.
•
Never us a damaged or dysfunctional device. Contact the manufacturer or have the device
controlled by a qualified repairman.
•
Always work with care and the attention required.
•
Never apply excessive force when using the device.
•
Fill in cleaning agent up to the level marked inside the tank.
•
Do not use cleaning agents with a flashpoint below 65
℃
.
•
Only use cleaning agents on petroleum base or those being biodegradable. Only cleaning
agents approved for use in electric parts washers are permitted.
•
Keep children and casual bystanders away from your work zone.
•
Only use the parts washer in well-ventilated rooms.
•
Do not smoke near the device and do not operate it near sources of heat such as heaters, open
flames, and sparks.
•
Should the parts washer begin to burn, do not try to move it. The cover, having a melting pro-
tection, closes automatically and extinguishes the fire. Never modify in any way the cover and
do not try to fix it by hand in open position.
•
Only use the device with earthed mains of 230 V / 50 Hz.
•
Do not perform work with this product when being tired or influenced by alcohol, drugs, or med-
icine.
•
When performing any kind of work with the parts washer, wear a suitable protection clothing
such as safety gloves, safety shoes, safety goggles, etc.
•
Only keep packing material (films, plastic bags, polystyrene, etc.) out of children’s, in particular
babies’ reach. Packing material hold dangers that might not be visible (e.g., risk of suf
focation).
Intended use
•
The device is appropriate for cleaning parts and assemblies of parts.
•
The device is not suitable for use together with any cleaning agent the flashpoint of which is
below 65
℃
.
Assembly instructions
1. Remove the device from its packaging and check it for damages or missing parts.
2. Remove all parts that may be inside the device.
3. Place a clean, solid sheet of cardboard on the ground and the machine thereon. (Make sure
that the lid is closed when placing the machine onto the cardboard.)
4. Fix the four legs to their supports with the help of the M6×12 cross-head screws and M6 union
nuts.
Note!
Do not tighten them yet!
5. Place the lower tray between the legs with the flat surface facing upwards and fix it to the legs
with the help of the M6×12 cross-head screws and M6 union nuts.
6. Firmly press the legs against the lower tray and tighten all screws of the lower tray.
7. Tighten all screws fixed during step 4.
8. Place the machine upright. Make sure that the lid remains closed.