WilTec 61127, Руководство по эксплуатации

Страница: 3 / 8

© by WilTec Wildanger Technik GmbH Item 61127 Page 3
http://www.WilTec.de
http://www.aoyue.eu 05 2021 -1
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Technical specifications
Fabrication Steel
Handle fabrication Steel
Length (
㎝
)
approx. 120
Features
•
The unique two-foot design keeps the handle clean, and hands are not
pinched.
•
Multi-purpose tool functions as log carrier, log pick-up, log lifter and post
remover.
•
Double stand for extra stability when carrying logs.
•
Long handle for greater leverage
•
Suitable for soft and uneven surfaces
•
For tree trunks up to 50 cm in diameter
Safety instructions
Warning! Read and understand all instructions before using this tool. The user/operator must take basic
precautionary measures to reduce the risk of damage to accessories and/or the risk of injury.
Keep this instruction manual! Keep this manual in a safe place so that you can refer to it at any time.
It contains important safety warnings, precautionary measures, operating or inspection and mainte-
nance instructions.
Danger warnings! Please familiarize yourself with the danger warnings to be found in these instruc-
tions. These warnings indicate that property might be damaged, persons might be injured or even killed
if certain instructions and cautions are not followed.
Warning! Only use tested and approved protective equipment.
Personal protective equipment
•
During work, wear impact-proof goggles that ensure front and side protection of the eyes. The
goggles should meet the standards that depend on the type of work being carried out.
•
In addition to the protective goggles, wear a suitable full-face protection, as chips or abrasive
particles can be produced during work.
•
Wear gloves that protect your hands depending on the material of the workpiece.
•
Wear protective clothing suitable for the work environment and the tool.
•
Non-slip shoes are recommended so that you have a secure footing in the work area and are
able to keep your balance.
•
Wear safety shoes or shoes with steel toecaps to avoid injuries of your feet from falling objects.