WilTec 61123, Руководство по эксплуатации

Страница: 7 / 12

© by WilTec Wildanger Technik GmbH Item 61123 Page 7
http://www.WilTec.de
http://www.aoyue.eu 06 2021 -1
http://www.teichtip.de
•
Check the function of the lower protective spring. If the guard and spring are not working
properly, they must be repaired before use. Damaged parts, rubber build-ups or dirt can cause
the lower guard become sluggish.
•
The lower guard should only be retracted manually for special cuts such as “plunge cuts” and
“compound cuts.” Raise the lower guard by pulling in the handle, and once the blade enters
the material, the lower guard must be released. The lower guard should work automatically for
all other sawing work.
•
Always ensure that the lower guard covers the saw blade before placing the saw on the table
or floor. An unprotected, extending saw blade will cause the saw to move backwards and cut
anything in its path. Note how long it takes for the blade to stop after releasing the switch and
do not put it away until the saw blade has come to a complete stop.
Parts overview (Fig.1 )
Figure 1
№ Name № Name
1 Locking screw for edge guide 5 Release button
2 Clamp for adjusting the cutting depth with
locking lever 6 Switch
3 Saw blade clamping screw with washer 7 Soft grip
4 Cutting depth scale 8 Storage for hexagon key