Do not misuse the cable to carry or hang the power tool, or to pull the plug out of the outlet.
Keep the cable away from heat, oil, sharp edges, or objects with moving parts. Damaged or
entangled cables increase the risk of an electrical shock.
When working with a power tool outdoors, use only extension cords that are designed for out-
doors. The use of a extension cord designed for the outdoors reduces the risk of electrical
shock.
If the use of the power tool in a damp area is unavoidable, use a residual current device to re-
duce the risk of an electrical shock.
Personal safety
Make sure to pay attention to what you are doing and use caution while working with a power
tool. Do not use a power tool if you are tired or under the influence of drugs, alcohol, or medic -
ation. The slightest distraction or inattention can result in serious injury.
Wear personal protective equipment and always protective goggles. The wearing of personal
protective equipment, such as a dust mask, slip-resistant footwear, protective helmet, or ear
protectors (depending on the form or use of the power tool) reduces the risk of injury.
Avoid an unintentional starting up. Make certain that the power tool is turned off before it is
plugged into a power source and/or before a battery is attached or before it has to be carried
or picked-up. If your finger is on the “on” switch while carrying the power tool or the machine is
plugged in the switch being in the “on” position, serious injury or accidents can result.
Remove the adjustment tool or wrench before turning on the power tool. A tool or wrench in a
rotating machine part can cause serious injury.
Avoid using unusual body-stance or posture. Make sure to have a secure stance and to be
able to maintain balance. As a result, it will be easier to control the power tool in unexpected
situations.
Wear proper clothing. Do not wear wide clothing or jewellery. Keep hair, clothing, and gloves
away from moving parts. Loose clothing, jewellery, or long hair could get caught by the moving
parts.
If a dust extractor or receptor can be attached, make sure that such is attached and used
properly. Use of a dust extractor can reduce the dangers of dust particles.
Careful handling while using power tools
Do not overload the machine. Use the correct tool for the job. Work better and safer with the
correct power tool, and within the power capacity range.
Do not use a power tool whose power switch ist defective. A power tool that can no longer be
turned on or off, is dangerous and must be repaired.
Pull the plug out of the outlet and/or remove the battery before making adjustments to the ma -
chine settings, changing parts or storing the machine. These extra measures will help prevent
any unexpected starting of the power tool.
Keep unneeded power tools out of the reach of children. Do not allow the power tool to be
used by a stranger or by persons who have not read this instruction manual. Power tools are
dangerous when they are used by inexperienced persons.
Take care of your power tool. Check to make sure that moving parts are functioning properly
and not locking or jamming, if parts are broken or damaged in such a way that the mode of op-
eration of the power tool is affected. Have damaged parts repaired before using the machine.
Many accidents are caused by poorly maintained power tools.
Keep cutting edges sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less prone to jamming or locking and are easier to handle.
Use the power tool, its accessory parts and replacement parts in accordance with these in-
structions. Consider the working conditions and the task at hand. Using a power tool for a pur-
pose other than its intended use can lead to dangerous situations.
Service
Have the power tool repaired only by qualified persons and only with the original replacement parts in
order to ensure that the safety of the machine is maintained.
© by WilTec Wildanger Technik GmbH
Item 61054
Page 5
http://www.WilTec.de
http://www.aoyue.eu
12 2020
-1