https://www.naturewater.eu
Item 52365
Page 10
11 2022-1
№
Name
№
Name
1
over
4
Pipe saddle
2
Drain opening
5
Slot
3
Battery compartment
Power-supply unit
The power-supply unit can replace the batteries concerning in terms of power supply.
Note!
Do not use other power-supply units than the one included in the scope of delivery.
To install the power-supply unit, do the following steps:
1.
Remove the cover.
2.
Remove the battery compartment installed, then unplug the battery connection plug (very im-
portant!).
3.
Plug the round plug of the power-supply unit into the socket of the card.
4.
onnect the power-supply unit to the mains.
5.
Put the power-supply cable into the cable slot of the inlet.
6.
Re-place the cover onto the device, making sure that no wire are pinched.
