WilTec 52170 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 15

WilTec 52170 Скачать руководство пользователя страница 3

© by WilTec Wildanger Technik GmbH

Item 52170

Page 3

http://www.WilTec.de

http://www.aoyue.eu

05 2021

-1

http://www.teichtip.de

Introduction

Thank you very much for buying this quality product. To reduce the risk of injury, we ask you to always
regard a few basic safety requirements, when using this product. Please thoroughly read the operating
manual and make sure that you have understood it.
Keep the operating manual for future reference.

Safety notes

Careful!

This device is not meant to be used by people (including children) with limited physical, sensory or
mental abilities and/or lack of knowledge, unless they are supervised by a person responsible for their
health and safety or have been instructed by this person on how to use the device. Children need to
be supervised to ensure that they do not play with the device.

Attention!

•

Visually examine the device before every use. Do not use the device if the safety measures
are damaged or worn. Never override safety measures.

•

Only use the device according to the purposes in this manual.

•

You are responsible for the safety in the working area. Keep the working area clean and tidy
at all times, to reduce the risk of accidents.

•

If the electricity cable or the electricity plug are damaged due to external influences, the cable
must not be repaired, but needs to be exchanged. This work must only be carried out by a
qualified technician.

•

The rated voltage on the type label of 230 V AC needs to correspond to the existing mains
voltage.

•

The device must never be lifted, transported or attached from its electricity cable.

•

Ensure, that the electrical plug connection is in an area protected from flooding and humidity.

•

Always pull the electricity plug before carrying out any work on the device.

•

Avoid exposing the device to a direct stream of water or rain.

•

The operator is responsible for the compliance with local safety and installation requirements.
If necessary, ask a qualified technician if unsure.

•

In case of a failure of the device, maintenance work may only be carried out by a qualified
technician.

•

Read all safety notes and instructions. Non-compliance with the safety notes and instructions
can lead to electric shock, fire and/ or serious injury.

•

Keep all safety notes and instructions in a safe place, which is accessible at all times.

Carefully read the instructions

to obtain the best

breeding results.

General notes

Surrounding conditions

Voltage

230 V/50 Hz

Relative air humidity

Between 55 % and 75 %

Surrounding temperature

Between 17

℃

and 25

℃

«
1
2
3
4
5
...
»

Содержание 52170
















Отзывы:

Нет отзывов