© by WilTec Wildanger Technik GmbH
Item 51792, 51793
Page 3
06 2021
-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
BEWARE:
The use of this device is allowed on standing water bodies, garden ponds, or swimming ponds and their
surrounding areas only with fault current protection-switch with a triggering nominal current up to 30 mA
(according to VDE 0100 article 702 and 738).
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory, and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or unless they follow the instructions made by this person on
how to use the device correctly. Children should be supervised to make sure that they do not play with
the device.
ATTENTION:
•
Run a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•
Only use the device accordingly to the intended purpose stated in the instructions for use.
•
You are responsible for the safety inside the working zone.
•
If the cable or the plug is damaged due to external influences, the cable must not be repaired,
but must be replaced with a new one. This work can only be carried out by an electrician.
•
The voltage of 230 V AC indicated on the type plate of the device has to correspond to the
existent mains voltage.
•
Never lift, carry, or fix the device by using the power cable.
•
Make sure that the electrical plug connection is protected from flood and moisture.
•
Before working on the pond filter, disconnect the device by pulling out the plug.
•
Avoid exposing the device to a direct water jet or rain.
•
The user is responsible for the compliance with local safety and installing regulations. Ask an
electrician.
•
Damage arising from flooded rooms caused by dysfunctions of the device must be avoided by
means of the appropriate measures (e.g., installing an alarm system, a reserve pump).
•
In case of malfunction, repair works can only be carried out by a qualified electrician.
•
The device must not run dry or with an
intake port completely closed. The manufacturer’s war-
ranty is no longer valid if the damage is caused by dry running.
•
The device must not be used for drinking water circuits.
•
The device has to be installed out of water.
•
You have to make sure that the filter cannot fall into the water.
•
You have to make sure that the filter is not exposed to direct sunlight.
•
The pond pressure filter has to be horizontally fixed with screws on a suitable mounting place.
•
The universal-hose stepped tails can be shortened according to the hose diameter if necessary.
•
Attach hoses and hose clamps.