Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Description
The professional balancer is a great help in the correction of unbalance. With the use of gravity, it can
find the focus of any tire and is suitable for almost all motorcycles. With the robust steel construction,
this balancing machine guarantees a long-term use.
Safety instructions / warnings
The owner and / or user must have read and understood the operating instructions of the device be-
fore using it. Installed personnel should be cautious, competent, trained and qualified in the safe hand -
ling of the working equipment used when working on engines and their components. Warnings should
be read and understood.
•
Be familiar with the application control, the application process and the warnings.
•
The engine stand may only be used for the removal and installation of engine stands (gears,
differential gears, etc.).
•
Ensure that all connectors are secure.
•
Make sure that you know the contents of the instructions for use.
•
This device is not intended to be used by persons (including children) with reduced physical,
sensory or mental abilities or persons who do not have the appropriate experience or know-
ledge, unless a person responsible for their safety Person observes them or has given them
instructions on how to use the equipment.
•
Children must be supervised to ensure that they do not play with the device.
•
Immediately report to your supervisor or workshop as soon as something unforeseen hap-
pens.
•
Always pay attention to the optimal workplace lighting.
•
Be sure to wear solid footwear.
•
Use a hairnet for long hair
•
Wear tight clothing.
•
Place jewelry (rings, earrings, watches, etc.).
•
Be careful not to wear loose straps or belts.
Using the balancing block
Use the balancing block on a stable flat surface. If necessary, adjust the feet.
In the first step, install the empty rim without tires on the balancer. When the wheel is centered
on the spindle, fix the screws in the cones with a 3 mm hex wrench. Check the tight fit.
© by WilTec Wildanger Technik GmbH
Item 51742
Page 3
http://www.WilTec.de
http://www.aoyue.eu
01 2021-1
