© by WilTec Wildanger Technik GmbH
Seite 3
November 2019
Version
2
Safety Instructions
This device can only be used in the vicinity of bodies of standing water, garden ponds or swimming
ponds, if connected to a fault current protection-switch with a triggering nominal current up to 30mA
(according to VDE 0100 Article 702 and 738).
The device is not suitable for usage in swimming pools, paddling pools and other bodies of water, which
might be used by people or animals during operation. The device must not be used while sentient beings
are within the hazard area. In case of doubt contact a professional electrician.
This device can only be utilized by children or individuals with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, if they have received instructions concerning the use
of the appliance from and are being supervised by a person familiar with the product and responsible
for their safety. Children should be supervised at all times in order to ensure that they do not play with
it.
•
Run a visual inspection of the device before every use. Do not use the device, if safety appli-
ances are damaged or show signs of wear. Never ignore safety regulations.
•
Only use the device for its intended purpose stated in this instruction manual.
•
You are responsible for the safety within your working environment.
•
The cable or plug must not be repaired in case of being visibly damaged and instead has to be
replaced with a new one by a qualified electrician.
•
The voltage indicated on the type plate of the device corresponds to 230 Volt alternating voltage
and has to match the mains voltage on site.
•
Never pull, lift, carry or fixate the device by its power cable.
•
Always ensure that the power plug and socket-outlet are located within a flood-proof area and
are protected from moisture
•
Always disconnect the device from the mains supply before performing repairs or maintenance
work.
•
Ensure that the device is not directly hit by streams of water.
•
The owner of the device is responsible for its proper installation in accordance with the local
installation and safety regulations. (Eventually contact a qualified electrician)
•
The user is responsible for taking the appropriate measures (such as the installation of alarm
systems or standby pumps) in order to avoid consequential damage caused by flooding of
rooms due to a malfunction of the device.
•
The pump must never run dry or be utilized while its inlet port is closed completely. In case of
the device running dry, the manufacturer warranty will be voided.
•
The device must not be connected to systems supplying drinking water.
•
The device must not be utilized to operate swimming pools.
Carefully read all the safety guidelines and instructions found in this manual
.
Failure to comply with the rules safety rules and regulations may lead to electric shock, fire and/or seri-
ous damage and injuries. Always make sure to properly store this instruction manual for future reference.
Stability
The maximum temperature of the conveyed liquid should not 35°C during permanent opera-
tion. The conveyance of flammable, gassing or explosive liquids is forbidden while the conveyance of
aggressive fluids (such as acids and bases) as well as abrasive liquids (such as sand) must be avoided
in order to prevent the pump from being damaged.
In order to prevent the pump from running dry, we recommend the use of one of our automatic pump
control systems.
