Lowering a Load
1. The jack must be loaded with at least 50 kg of weight in order to ensure an even lowering. If
the weight is too low, uncontrolled lowering may occur.
2. Follow the safety precautions before lowering a weight. Set the backstop
(17)
to the “Down”
position. Make sure that the lever is in the correct position and is not blocked by the tab (see
following figure)
3. Operate the lever evenly and carefully lower the load.
© by WilTec Wildanger Technik GmbH
Item 51296
Page 5
http://www.WilTec.de
http://www.aoyue.eu
12 2020-1