© by WilTec Wildanger Technik GmbH
Item 50797
Page 3
03 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Warning!
When using the motorcycle lift, it is necessary to know the balance point of your motorcycle. Thus, you
must ensure first to know it.
Before using the lift, make sure that the motorcycle that you wish to support has a construction et bal-
ance point suitable for supporting; thus, you will avoid damages that might occur otherwise. Do not use
the lift when it squeezes the exhaust pipe or other fragile components.
•
Place the lift in a suitable work area. Keep the work area clean and tidy, remove all foreign
matter, and ensure sufficient illumination. Furthermore, make sure that the ground is level and
sufficiently stable (prefer concrete) to bear the weight both of the motorcycle and of the lift.
•
Keep the lift clean to ensure optimal and safe performance.
•
The maximum capacity of the lift is 500
kg; make sure not to exceed this nominal capacity.
•
Before lifting, make sure that no obstacle can interfere with the lifting process.
•
Keep children and unauthorised persons away from your working area.
•
Do not use the lift for a job that it is not designed for.
•
Do not use the lift in case it is damaged.
•
Do not allow any untrained person to use the lift.
•
Do not modify the lift in any way.
•
Keep your hands and feet away from the lift while it is moving.
•
During operation, wear a suitable protective equipment. Do not wear loose clothing or jewellery
that could get caught in moving parts.
•
When the platform has reached its operational height, make sure that the safety pin is engaged.
This pin prevents the lift from retracting.
•
Having finished work, first make sure that there are no objects under the motorcycle or lift before
re-lowering the motorcycle. After that, very slowly activate the deblocking valve to lower the lift.
•
Before storing the device, make sure that all components are clean, free from fat and oil, and
that the lift has been lowered completely.
•
Store the lift in a safe place.
•
Do not expose the lift to rain or snow.
•
Make sure to have read the operational manual of the lift before using it. Bad use of the lift may
lead to damages or severe injuries.
Attention!
This motorcycle lift is not designed as permanent-lifting ramp.
Technical specifications
Maximum weight
(
㎏
)
Adjustable operation
height (with supports)
(
㎜
)
Contact surface
(supports)
(
㎜
)
Contact surface
(
㎜
)
500
150–480
55×40
450×150
