background image

 

© by WilTec Wildanger Technik GmbH 

 

Item 34220, 34251, 34259–34263

 

Page 3 

 

http://www.WilTec.

de

 

http://www.aoyue.eu  

 

  

 

02 2022

-1

 

http://www.teichtip.de

 

 

Introduction

 

 

Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to 
always take some basic safety precautions when using this product. Please read this operating manual 
carefully and make sure that you understand it.

 

Keep these operation instructions in a safe place.

 

 
 

Safety instructions

 

 

 Caution!

 

 

The use  of this device  is only allowed with a fault current protection switch with  a triggering 
nominal current up to 30

 

mA (according to VDE 0100

 

Article 702 and 738).

 

 

The device is not intended for use by persons (including children) with impaired or limited phys-
ical, sensory, and mental abilities or lack of experience and/or real knowledge, unless they are 
supervised by a person responsible for their safety or follow the instructions made by this person 
on how to correctly use the device.

 

 

Children should be supervised to ensure that they do not play with the device. Always keep the 
device out of children’s reach.

 

 

 Attention!

 

 

Perform a visual inspection of the device before every use. Do not use the device if the safety 
appliances are damaged or worn out. Never override safety regulations.

 

 

Only use the device accordingly to the intended purpose stated in this manual.

 

 

You are responsible for the safety of the working zone.

 

 

If the cable or the plug is damaged due to external influences, the cable must not be repaired, 
but must be replaced with a new one. This work may only be carried out by an electrician.

 

 

The  voltage  of  230

 

V  AC  indicated  on  the  nameplate  of  the  device  must  match  the  existent 

mains voltage.

 

 

Never lift, transport, or suspend the device by its power cord.

 

 

Make sure that the electrical plug connection is protected from flood and moisture.

 

 

Before any maintenance work or adjustment, pull out the plug.

 

 

The user is responsible for complying with local safety and mounting regulations. Ask an elec-
trician if you have questions.

 

 

In case of device failure, repairs can only be carried out by an electrician.

 

 

 Notes!

 

 

Never expose the device to dust, acid, steam, explosive or flammable gases, or weather influ-
ences (rain, sun, fog, snow).

 

 

Never allow children to touch the switched-on compressor or to insert the plug. It may cause 
burns or electric shocks.

 

 

When beginning work, make sure that all screws are tightened.

 

 

The warranty will be void after any damage caused by non-observance of the instructions of 
this user’s manual. We are not to be held responsible for any consequential damage.

 

 

Nor are we to be held responsible for any damage to objects or any injury caused by an improper 
use or non-observance of the safety instructions. In these cases, the warranty will be void.

 

 

For safety reasons, unauthorised transformation, modification, or disassembly of the device is 
not permitted.

 

 

The device is only suitable for use in dry interior rooms (thus not in a bathroom or comparable 
damp rooms). 

Danger of electric shock!

 

 

Do not expose the device or its accessories to damp or excessively high or low temperatures.

 

 

Do not leave the packaging material without supervision; children might play with it and harm 
themselves. 

Risk of injuries! Danger of suffocation!

 

Содержание 34220













Отзывы: