© by WilTec Wildanger Technik GmbH
Item 34204
Page 4
07 2021
-1
•
Never use the compressor in areas with vapours or humidity or near bodies of water.
•
Switch off the compressor if you do not use it. Disconnect from mains before you repair,
recondition, maintain, clean, or replace parts. Never use the power cable as handle. Keep the
cable away from heat, oil, or sharp edges. Protect it from breaking. Do not pull out the plug by
pulling the power cable.
•
If the compressor is used outdoors, only approved extensions may be used. Every wire of the
extension cable must have at least a 1,5 mm² cross-section.
•
Store the compressor in a well-ventilated place. Do not allow children or any other people not
able to handle this device to play or work with it.
•
Be very careful when working with the compressor. Do not perform work with this product when
being unalert or influenced by alcohol, drugs, or medicine.
•
When beginning work, make sure that all screws are tightened.
•
Do not use the compressor if it is damaged. If the compressor makes unusual noises and strong
vibrations or if other unusual signs occur that indicate some damage, immediately turn off the
compressor. Do not modify the compressor in any way. Only have repairs made by qualified
persons and using original spare parts.
Properties
•
Compressor with casing, airbrush gun holder, good design, and optimal functionality
•
Oil free, piston compressor, no polluted air
•
With water filter, pression adjustment, and manometer
•
Automatic start without counterpressure, extending the durability of the motor
•
Overheating protection
•
Very low noise level
•
Additional ventilation for a better cooling performance and longer lifetime
Use
The AF18A airbrush compressor is for example suitable for operating in the following areas: arts and
crafts, hobbies, modelling, tattoos and body art, make-up and nail design, as a source of air in the field
of medicine, in food industry, chemical industry, laboratories, etc.