background image

ENTERPRISE 1300 & 1300R    

IN-BUILDING CELL SIGNAL AMPLIFIER

43

The following accessories are certified by the FCC to be used with the 
ENTERPRISE 1300/1300R.
This radio transmitter 4726A-460049 / 4726A-460050 has been approved 
by Innovation, Science and Economic Development Canada to operate with 
the antenna types listed below, with the maximum permissible gain indicated. 
Antenna types not included in this list that have a gain greater than the maximum 
gain indicated for any type listed are strictly prohibited for use with this device.

All equivalent or lesser antennas and cables are suitable for use with 
1300/1300R signal boosters.

314411

Wide Band Directional Antenna (Outside Antenna)

952300

100 ft. Wilson400 Cable (for Outside Antenna)

304412

Dome Antenna (Inside antennas)
952300

100 ft. Wilson400 Cable (for Inside Antennas)

859902

50 Ohm Lightning Surge Protector

952302

2 ft. Wilson400 Cable

B12/17

B13

B5

B4

B25/2

Outside antenna maximum permissible 

antenna gain less coax loss (dBi) 50Ω

3.576

3.21

3.012

2.048

1.918

Inside antenna maximum permissible

antenna gain less coax loss (dBi) 50Ω

-2.43

-1.69

-3.09

-0.33

-1.29

Kit Components

Содержание ENTERPRISE 1300

















































Отзывы: