Wilson Electronics WILSON PRO 1050, Руководство пользователя

Страница: 16 / 20

14
IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION
WILSON PRO 1050
Product Number 460030
Model Number 460030
FCC ID PWO460030 / PWO0460030IL
IC ID 4726A-460030
Connectors N-F
emale
Antenna Impedance 50 Ohms
Frequency 698-716 MHz, 729-746 MHz, 777-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz
Power output for single cell
phone (Uplink) dBm
700
MHz
Band12/17 700
MHz
Band13 800
MHz
1700
MHz
1900
MHz
24.7 24.7 24.3 25.1 24.5
Power output for single cell
phone (Downlink) dBm
700
MHz
Band12/17 700
MHz
Band13 800
MHz
2100
MHz
1900
MHz
14.8 14.3 15.2 15 15.1
1050 Main 1050 In-Line
Noise Figure 5 dB nominal 5 dB nominal
Isolation > 90 dB > 90 dB
Power Requirements 110-220V AC 5V 3A
The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be
adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter
incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster
is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency
band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that
band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1
minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster
has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity
are maintained by the Signal Booster’s microprocessor.
___________
Specifications