Wilson Electronics MX-3050, Быстрое руководство

Страница: 2 / 22

Inner Finisher (50 sheet stapler)
Open Door for Staples
Covenant Stapler (5 sheets)
1k Finisher (50 sheet Stapler) 3k Saddle Finisher (65 sheet Stapler)
Open to replace staples Open
How to change staple Cartridge

Open the front cover on the finisher

Pull down lightly on the green tab to release the staple cartridge.

Note: On the inner finisher the cartridge will not be available to grab until it
is completely empty. There is no sensor to tell you when it’s getting low on
staples, so if you do a lot of stapling it’s a good idea to have a spare set.

Pinch the empty clear plastic cartridge on the arrows that point upward and
remove the empty box, discard/recycle, leaving the chassis empty for the
new cartridge

Insert the full, new cartridge into the chassis the until it clicks into place

Insert the chassis with the new cartridge back into the finisher with the
green tab facing towards the front of the machine

Close the front cover on the finisher

Test the stapling feature to make sure it staples properly

Sometimes it shoots a few blanks to advance the new sheet of staples to
the front of the chassis