background image

Amplifier

Amplifier

Installation

Guide

stallatio

stallat

Warning: 

This manual contains 

important safety and operating information. 
Please read and follow the instructions 
in this manual. Failure to do so could be 
hazardous and result in damage to your 
amplifi er.

!

SIGNALBOOST™
Dual-Band
Cellular / PCS
Amplifi er

Contents:

Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · ·  1
How it Works  · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·   2
Before Getting Started · · · · · · · · · · · · · · · · · · · · · · · · · ·   3
Installation Overview  · · · · · · · · · · · · · · · · · · · · · · · · · · ·   3
Installing the Antenna (Vehicle)  · · · · · · · · · · · · · · · · · · ·  4
Installing the SIGNALBOOST™ Amplifi er (Vehicle)   · · ·  5
Installing the Antenna (Home/Offi ce)  · · · · · · · · · · · · · · ·  6
Installing the SIGNALBOOST™ Amplifi er (Home/Offi ce)  6
Installing the Universal Connector  · · · · · · · · · · · · · · · · ·  7
Powering Up the Amplifi er  · · · · · · · · · · · · · · · · · · · · · · ·  8 
Warnings and Recommendations  · · · · · · · · · · · · · · · · ·  9 
About Wilson Electronics  · · · · · · · · · · · · · · · · · · · · · · · · 10
Amplifi er Specifi cations  · · · · · · · · · · · · · · · · · · Back Cover

Wilson

®

         Electronics, Inc.

Содержание Car Amplifier













Отзывы: