Wilson Electronics BAIARDO L Скачать руководство пользователя страница 3

BAIARDO L OPERATION MANUAL

 BAIARDO L OPERATION MANUAL

3

4

WARNINGS & PRECAUTIONS

Save these instructions. Read all instructions before using the appliance.

Recommended for indoor use.

Recommended operating temperature is 10-40 °C, 50-104 °F

Keep all liquids away to reduce risk of electrical shock.

NEVER use if safety cover is missing or loose. Exposed moving parts could cause serious injury.

Never insert fingers or body parts into Motor Housing.

This machine is only to be powered by 24Vdc SELV power, such from the external power supply.

Extension cords should be chosen carefully and inspected regularly. Replace rather than repair.

Wilson will not be held liable for any damage (direct or indirect) caused by incorrect installation, poor maintenance, 
non-approved alterations or improper use. We will also not be held liable for failure to comply with safety standards 
for accidents, fire or the safety of electrical installations.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 
capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety.

Children are to be supervised so that they do not play with the product.

Make sure the stringing machine is always turned off before cleaning it or servicing one of its components. Unplug 
the power cable from the mains socket. Never wash the machine using water, a hose or high-pressure cleaning 
device.

Children should not clean or perform maintenance on the stringing machine.

Cleaning and maintenance should be done only as detailed in this manual or at www.wilson.com/baiardo

ASSEMBLING THE MACHINE

To assemble the machine, follow all steps listed on the included set-up guide in order.

To acquire a new or missing set-up guide, go to www.wilson.com/baiardo to view or download a copy.

All parts are shown in the set-up guide. Contact your Wilson representative immediately if any parts are missing.

All tools for assembly are included.

Some steps require two people as noted in the set-up guide.

Use EXTREME caution until fully assembled.

DESCRIPTION OF PARTS 

BADMINTON

TURNTABLE

VERTICAL COLUMN

SAFETY COVER

LEVELING ADJUSTMENTS

HEX WRENCH SET

BADMINTON ADAPTERS

BADMINTON INNER 

SUPPORT PADS

TURNTABLE  

BRAKE PADS

TENNIS INNER  

SUPPORT PADS

STARTING CLAMP

CUTTER

BADMINTON 

STRINGING HOOK

STRAIGHT AWL

PATHFINDER AWL

PLIERS

POWER CORD

CLAMPS

TILT WRENCH

FLOOR PLATE

LARGE TRAY

FRONT TRAY

REEL RACK

TOUCH PANEL &  
ELECTRONICS BOX

SIDE TOOL TRAY

MOTOR HOUSING

OUTER SUPPORT ARMS

INNER SUPPORT ARMS

PULLER

DESCRIPTION 

OF PARTS

Содержание BAIARDO L













Отзывы: