Wilson Electronics Alexandria XLF Скачать руководство пользователя

Страница: 92 / 94

l e x A n d r i A

x l F O

w n e r

’

A n u A l

W i l s o n A u d i o S p e c i a l t i e s

In instances where return to Wilson Audio’s factory is required, the dealer or customer

must first obtain a return authorization. Purchaser must pay for shipping to Wilson Audio,

and Wilson Audio will pay for shipping of its choice to return the product to purchaser.

A RETURNED PRODUCT MUST BE ACCOMPANIED BY A WRITTEN DESCRIPTION OF

THE DEFECT. Wilson Audio reserves the right to modify the design of any product without

obligation to purchasers of previously manufactured products and to change the prices or

specifications of any product without notice or obligation to any person.

Remedy

In the event that the product fails to meet the above Limited Warranty and the con-

ditions set forth herein have been met, the purchaser’s sole remedy under this Limited

Warranty shall be to: (1) contact an authorized Wilson Audio Dealer within the Warranty

Period for service or repair of the product without charge for parts or labor, which ser-

vice or repair, at the Dealer’s option, shall take place either at the location where the

product is installed or at the Dealer’s place of business; or (2) if purchaser has timely

sought service or repair and the product cannot be serviced or repaired by the Dealer,

then purchaser may obtain a return authorization from Wilson Audio and at purchaser’s

expense return the product to Wilson Audio where the defect will be rectified without

charge for parts or labor.

Warranty Limited to Original Purchaser

This Limited Warranty is for the sole benefit of the original purchaser of the covered

product and shall not be transferred to a subsequent purchaser of the product, unless

the product is purchased by the subsequent purchaser from an authorized Wilson Audio

Dealer who has certified the product in accordance with Wilson Audio standards and

requirements and the certification has been accepted by Wilson Audio, in which event

the Limited Warranty for the product so purchased and certified shall expire at the end

of the original Warranty Period applicable to the product.

Содержание Alexandria XLF































































































Результаты поиска

Содержание Alexandria XLF

Отзывы:

Похожие инструкции для Alexandria XLF

Бренды по названию

Популярные бренды

Wilson Electronics Alexandria XLF, Руководство пользователя

Результаты поиска

Содержание Alexandria XLF

Отзывы:

Похожие инструкции для Alexandria XLF

Бренды по названию

Популярные бренды