4G LOW-PROFILE DOME ANTENNA
7
______
Installation:
Without Ceiling
Mount
This option is used if attic access is available, in which the reflector
can be used to increase performance.
Drill or cut a hole 2.5-2.75 in. (64-
70mm) in center of ceiling tile or
at desired location.
Slide the antenna/assembly
through the hole. Slide the collar
and nut onto the cable. Turn
the nut, tightening the antenna
against the ceiling.
NOTE: Fiberboard ceiling tile is
soft; tighten the nut just enough
to hold the antenna firmly
in place.
NOTE: For optimum performance,
metal ceiling rails need to be a
minimum 7.875 in. (200mm) from
the antenna center.
1
2
2.5 - 2.
75 in.
ceiling
nut
collar
reflector
attic space
attic space
2.5 - 2.
75 in.
ceiling
nut
collar
reflector
attic space
attic space
