1
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Hours: 7 am to 6 pm MST.
2
How it Works
The Desktop Antenna transfers the improved signal from the Signal Booster (sold
separately) to one or more cell phones or cellular data cards.
The Desktop Antenna may work with any In-Building Wireless Signal Booster (an
adapter may be required for some Signal Boosters).
Consult the user guide for your particular Signal Booster for more specific
instructions on the use of the Desktop Antenna. Or contact Wilson Electronics
Technical Support Team at 866-294-1660.
Installing the Antenna
The location of the Desktop Antenna in relation to the outside antenna is very
important. Poor antenna placement increases the possibility of oscillation
(feedback), which causes system shutdown (indicated by a red light). Observe
the following rules for correct antenna placement and optimum performance.
Once you find a good signal location for the outside antenna, the front of the
outside antenna (the Wilson Electronics insignia) must face toward the cell
tower, and face AWAY FROM the Desktop Antenna. The Desktop Antenna must
be positioned at least 20 horizontal feet OR 15 vertical feet from the outside
antenna. See Figures below.
Wilson Electronics Signal Boosters Amplify Coverage
When used in conjunction with your antenna, a Wilson Electronics Signal Booster
can improve your cell phone and laptop data card coverage area up to 20 times.
Wilson Electronics manufactures a wide range of Wireless and Direct Connect
Signal Boosters for M2M, mobile or in-building use. See your dealer for details
or visit
www.WilsonElectronics.com
.
Signal Booster
with Desktop
Antenna
Cell
Tower
Minimum
Horizontal 20 feet
Cradle
Antenna
Cell
Tower
Cradle
Antenna
Signal Booster
with Desktop
Antenna
If antennas are too close,
a red light will come on.
Minimum
vertical
15 feet
Horizontal Separation
Vertical Separation
