1
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Hours: 7 am to 6 pm MST.
2
How It Works
Wilson Electronics Outdoor Panel Antenna will collect the cell tower signal and send it
through the cable to a Signal Booster, cell phone or data card. When the cellular device
transmits, the signal is transferred to a Signal Booster or directly to the antenna and
broadcasted back to the cell tower.
Package Contents
(
A) Outdoor Panel Antenna, (B) Pole Mounting Bracket), (C) 3 - Small Washers,
(D) 3 - Bracket nuts, (E) 1 - U-Bolt, (F) 1- Pipe Bracket, (G) 2 - Washers (H) 2 - 1/4” Split-Lock Washers
(I) 2 - 2 - 1/4”-20 nuts
Antenna Installation
The antenna should be mounted as shown in the illustration above. The included
mounting bracket is adjustable and will accommodate pipe diameters from 1.25” to 2”
(pipe sold separately Part# 901117). Mount the antenna so that there is at least 3 feet of
clearance in front and sides. Position the antenna so that it has the most unobstructed
line of sight to the cellular service provider’s strongest signal. If you are using a wireless
Signal Booster, make sure the antenna is not pointing across your own roof.
Warning:
Lightning protection is recommended for all installations (Wilson
Electronics Part #859902). Take extreme care to ensure that neither you nor the
antenna comes near any electric power lines.
Cell Tower
Drip hole on bottom
A
B
E
D
F
G
C
H
STEP 1
STEP 2
I
