Wilson Benesch A.C.T C60, Руководство пользователя

Страница: 10 / 17

10
The carbon panels actually improve in structural integrity as they age. The quality of
the sound that you hear when you first use your Wilson Benesch speakers will improve
quite significantly over time, though this change will not be instantly perceptible. Allow
at least seventy hours of running in before making any subjective judgements of the
speaker’s performance.
Surface Finish
Carbon fibre is a unique material with unusual physical and visual characteristics. We
like to remain truthful about the fibrous nature of the material as opposed to
concealing or obscuring it. The surface finishes applied to all Wilson Benesch
loudspeakers require no further attention other than the occasional dusting. Treat the
driver cones with respect and they will last a decade with relative ease.
Due to the angle of the cabinet top the appearance of stains, as a result of a glass
being placed on the surface for example is of course impossible. With a little care the
speakers will look as good in ten years as they do today and will probably sound even
better.
Other Adjustments
Under no circumstance should you make any adjustment to the system’s parts. Any
adjustments not described as required by the setting up procedure will nullify all
guarantees.
Should there be any question regarding the performance of this system you should
refer to your dealer immediately for advice and/or assistance. If in the unlikely event
that the problem cannot be dealt with by your dealer do not under any circumstances
return the gods to Wilson Benesch without prior agreement with the company.
Connections
This is a guide to the connections found at the base of each C60 speaker. When a
single run of speaker cable is used the supplied jumpers must be placed to bridge all
the negative and corresponding positive terminals. In order to assist in the fine-tuning of
C60 within your chosen environment we have provided additional input options that
allow for adjustment of the WB Tweeter output. When wiring the system please ensure
only one of the positive tweeter connections is used at a time to achieve desired
output (there should only ever be a maximum of 6 connections per speaker). The
Sphere, ultrasonic generator) is fed from the unfiltered midrange input to allow for full
frequency extension.