WILSON AUDIO WATCH SURROUND, Руководство пользователя

Страница: 73 / 98

W I L S O N A U D I O S P E C I A L T I E S , I N C .
F
I N A L
S
Y S T E M
T
U N I N G A N D
V
O I C I N G
7-7
S
ECTION
7.3 T
WO CHANNEL
F
INAL
S
ETUP
P
ROCEDURE
The final step in setting up your on wall stereo speakers is to set the rotation.
Remember that the mounting bracket allows for the speaker to rotate on the upper
spikes. This rotation allows the speaker to be toed in towards the listening posi-
tion. The lower spike can be changed to optimize the phase delay character of the
speaker and set the correct image height. For this purpose, three different length
lower spikes are provided. Careful evaluation of the rotation will significantly im-
prove the performance of your speakers. Determine the correct rotation as follows:
•
Sit in your listening position. Make certain to remove the grilles.
•
Adjust the rotation of the speakers so that they are firing straight forward.
•
Using a piece of full range music (dynamic with a lot of low frequency in
formation) played at a moderately high level, take notes on the sound qual-
ity. Pay specific attention to upper and lower bass quality, dynamic con-
trasts, image height and focus.
• Find the rotation where the bass is tight, dynamics are correct, image is
well focused and you find the best sound staging.
• Play a simple piece of music with one vocal only. The selection should be
one that you are familiar with and know to have clean and well focused
vocals.
• Find the lower spike (#2, #3, #4), that offers the most correct image
height and an overall naturalness in the voice.
• Set this as your final location.