WILSON AUDIO Watch Surround 2 Series, Руководство пользователя

Страница: 58 / 91

W A T C H S
u r r o u n d
S
e r i e S
2 o
W n e r
’
S
M
A n u A l
58
W i l s o n A u d i o S p e c i a l t i e s
may shift slightly, but you can move them precisely back to the correct location again
using your tape markers.
Section 5.2 – Integrating the WATCH System
Note: Many processors offer a setup guide that steps you through the integration of
each of the speakers, specifically, setting speaker distances, delays, and phase rota-
tion. These adjustments are made via internal electrical adjustments. We have found
that actual geometric changes, that is, moving the speaker location and rotation, offer
improved results when integrating speakers. We recommend that you follow the steps
outlined below, evaluate your system performance, and then make adjustments in the
processor. Ultimately, you will, of course, need to make level adjustments via the pro-
cessor.
Integrating the WATCH Center
The next step in the setup process is to fine-tune the location and rotation of the
Center channel. Do as follows:
• Place the Center channel centered between the main speakers and even
with the front inner edge. Set the spikes as indicated in the Center channel
manual.
• Follow the processor instructions on level adjustment. Adjust the level on
the Center channel so it matches in level with the left and right channels.
Do not be surprised if the Center channel requires 7-10 dB lower adjust-
ment than the left and right channel.
• Make sure that only the front left, right, and Center channels are connect -
ed.
• With the Center channel spiked, put on a multi-channel audio track or
movie scene with which you are familiar.
• Play the selection and listen for the integration with the main speakers. As