WILSON AUDIO Convergent Synergy, Руководство пользователя

Страница: 25 / 49

The Mezzo mounts on top of the Hourglass stand, but does not bolt to it. The setscrews sit
inside the holes in the top of the stand.
Section 4.6—Set Up #3 Mezzo Convergent Synergy on Custom Stand or
Shelf
The speaker should be rotated so that the midrange drivers are firing just below the
listening position. Once you have made and mounted the custom bracket, setup the Mezzo
Convergent Synergy as follows:
1. Lay the Mezzo Convergent Synergy onto its side.
2. Using the provided 3/16 Allen wrench, back out the 4 setscrews from the
bottom of the Mezzo Convergent Synergy to the desired length.
Note: Be sure that the Allen key end of the setscrew is facing out.
Carefully lift the Mezzo Convergent Synergy and set the threaded setscrews into the
4 mounting holes located on the top of the mounted custom shelf.
3. Using the provided 3/8 – 16 nut, bolt the Mezzo Convergent Synergy to the
mounting bracket.
4. Turn to Section 4.7 for final assembly instructions.
Note: Be careful when loosening or tightening the screws that you do not damage the
painted finish.
Section 4.7—Connecting Speaker to Amplifier
Speaker Cables
The high current input terminals located on the rear of your Mezzo Convergent Syn-
ergy loudspeaker are color coded so that RED (marked “+”) corresponds to positive and
BLACK (marked “-”) to negative, common, or ground on the amplifier output. Be sure to
connect the loudspeakers in phase with each other. We recommend the use of the very
f
igure
13 – s
pade
l
ug
a
ttachMent
r
eSiStor
a
cceSS
M
ain
i
n
b
inding
p
oStS
f
igure
12 – M
ezzo
c
onVergent
s
YnergY
c
able
c
onnection and
r
esistor
a
ccess
W
ooFer
r
eSiStor
a
cceSS
s
e C T i O n
4 . 7 — C
O n n e C T i n g
s
p e a k e r T O
a
M p l i f i e r
M
e z z o
C
o n v e r g e n t
S
y n e r g y
o
w n e r
’
S
M
a n u a l
48 49
W i l s o n A u d i o S p e c i a l t i e s W i l s o n A u d i o S p e c i a l t i e s