manualshive.com logo in svg

WILSON AUDIO Alexia Series 2, Руководство по установке и эксплуатации

Поделиться
Скачать
WILSON AUDIO Alexia Series 2 Скачать руководство пользователя страница 30

30

 

a

l e x i a

 s

e r i e s

 2 i

n s Ta l l aT i o n

 

a n d

 C

a r e

 g

u i d e

upper arrays. Refer to the Alexia Series 2 Time Alignment Charts 
and the procedure in the previous section to determine the 
correct Aspherical Propagation delay spikes as necessary, the 
Alignment Block position, and the proper step location of the 
step.

Install the Upper Array As Follows

1.  Install the front pair of short (AA length) spikes into the bot-

tom of each module.

2.  Refer to the table labeled “Alexia 2 Upper Array Spike Length” 

and install the appropriate rear spike if necessary.

3.  Refer to table labeled “Alexia Series 2 Upper Array Alignment 

Block Step Position.” Using the rear edge of the Alignment 
Block as the guide, align the block to the proper front-to-back 
setting for the Upper Array. Once the block is in its proper po-
sition, lock it down using the 3/8” Allen wrench.

4.  Refer to the table labeled “Alexia Series 2 Upper Array Align-

ment Block Step” table. With the front spikes pointing down, 
carefully lower the Upper Array between the alignment wings 
and set it on top of the woofer enclosure. There are alignment 
tracks that accommodate the spikes and guide the Upper Array 
toward its appropriate resting place. Rest the rear spike on the 

step on the alignment block step indicated on the chart.

A u t h e n t i c   E x c e l l e n c e ™

Содержание Alexia Series 2





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды