G
C&2
C&2
C&3
1&2
A&3
A&3
A&1
3&5
3&4
B&1
B&3
B&3
Spring Ball
Spring Wire
Spring Wire
Spring Ball
Spring Ball
A
C
B
Special notice:
Before assembling, make sure that you lay out and iden fy all parts listed below
in the part list.
All bolts should be hand ghtened. Never use powder tools or excessive force
during assembly and ghtening of bolts.
It is recommended to assemble this product with
Step 1
Top frame assembly:
1)
Make tube 3#,4# and corner connector A,B together.
2)
Make tube 3#,4# and top connector C together.
3)
Connect tube 1#,2# with part A,B,C and make sure they click into place.
Step 2
Fit on the canopy fabric:
3)
Hook the fabric of legs to a suitable bo om hole on tube 5#, please see
FIGURE 1.
Step 3
Fix the whole canopy:
1)
Insert one steel stake F into a hole on plas c base D, make it fix on the ground, please see
FIGURE 1,
do same on other
3
bases .
2)
Make one end of the rope E e with the plas c ring on canopy fabric corner, please see
FIGURE 2,
the other end
with steel stake F , please see
FIGURE 3,
do same on other 3
ropes, pull the ropes to suitable 4 direc ons, fix the steel stakes F on the ground.
FIGURE 1
FIGURE
FIGURE
3
2
e
ti
ti
2 or more people.
4
4
4
3
3
3
3
3
3
1
1
1
3
3
3
3
5
5
1
2
2
2
2
A
A
C
C
B
B
According to the direction of
the arrow into the connector.
4) Connect tube 3# with part A & B to set up the frame top.
1 )
Fit o n th e can o p y fab ric G and p u ll th e can o p y fab ric
htly o ve r th e fram e.
5
5
D
D
D
