64
C
D
16
16
STEP 1:
Move the tiles from the table top to a soft place. Place the table
top ( A ) face down on a protected surface.
STEP 2:
1) Firmly insert table leg ( C ) into the frame of the table top ( A ),
using screw ( E ) and washer ( G )
2) Attach leg support ( B ) to leg ( C ) by inserting the screws ( E )
through the holes in leg ( C ). Place washer ( G ) onto screw E
and fasten. Hand tighten three to four turns only. Do not
tighten completely. Repeat on other three legs.
3) Tighten all screws with included wrench and allen wrench.
STEP 3:
Turn the table in the upright position, adhere the bumper on each
corner of the table block frame, put the tiles ( D ) on the table top
frame. Your table is now ready for use.
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
3