3
INSTALLATION INSTRUCTIONS
WWW.WILBRAD.COM.AU
1
3
5
2
4
HOW TO INSTALL
Installation bracket: In accordance with the
reserved installation location, install the box
bracket at the bottom of the box.
Separate the drawer: Separate the box and
the drawer: Take the drawer out of the box,
being careful not to damage the inside of the
drawer lock and electrical parts. Do not touch
the lock or other parts.
Install the outer box: Place the box on the
bracket to measure the position of the drawer.
From the inside of the box, screw the box,
locking the outer box.
Insert the drawer: Insert the drawer: Place the
drawer inside the outer box, paying attention
to align it with the slide rail. Slowly push the
drawer in, without using excessive force.
Front Panel Installation: Find the centre line of the front inside panel, to install two screws, with a distance
of 64mm. Then put the front panel to the corresponding drawer hole. Close the drawer to check that the
panel and drawer position align. Adjust the two screws to correct any panel alignment issues. Lastly, secure
the drawer box, with the screws for both sides of the drawer box. Then lock the drawer.
