Wilo Wilo-Smart, Инструкция по установке и эксплуатации

Страница: 9 / 28

Safety en
Installation and operating instructions Wilo-Smart Gateway 9
ƒ
Make sure that personnel are suitably trained for the specified work.
ƒ
Verify the area of responsibility and individual responsibilities of personnel.
ƒ
Train personnel with regard to the operating principles of the system.
ƒ
Eliminate risks from electrical current.
ƒ
Equip hazardous components (extremely cold, extremely hot, rotating, etc.) with a
guard to be provided by the customer.
ƒ
Remove leakages of hazardous fluids (e.g. explosive, toxic or hot) in such a way
that no danger is posed to persons or the environment. Comply with national stat-
utory provisions.
ƒ
Keep highly flammable materials at a safe distance from the product.
ƒ
Ensure compliance with the regulations for accident prevention.
ƒ
Ensure compliance with local directives or general directives [e.g. IEC, VDE, etc.]
and instructions from local energy supply companies.
Follow all information that appears on the product and ensure that it remains per-
manently legible:
ƒ
Warning and hazard notices
ƒ
Rating plate
ƒ
Direction of flow symbol
ƒ
Labelling of connections
This device can be used by children from 8 years of age as well as people with reduced
physical, sensory or mental capacities or lack of experience and knowledge if they are
supervised or instructed on the safe use of the device and they understand the
dangers that can occur. Children are not allowed to play with the device. Cleaning and
user maintenance must not be carried out by children without supervision.
2.5 Safety instructions for inspection and installation work
The operator must ensure that all inspection and installation work is carried out by
authorised and qualified personnel who have also sufficiently informed themselves by
studying the installation and operating instructions in detail.
Work on the product/unit may only be carried out when the system is at a standstill.
The procedure described in the installation and operating instructions for shutting
down the product/unit must be strictly observed.
Immediately on conclusion of the work, all safety and protective devices must be put
back in position and/or recommissioned.
2.6 Unauthorised modification and manufacture of spare parts
Unauthorised modification and manufacture of spare parts will impair the safety of
the product/personnel and void the manufacturer’s declarations regarding safety.
ƒ
Only carry out modifications to the product following consultation with the man-
ufacturer.
ƒ
Only use original spare parts and accessories authorised by the manufacturer.