Wilo ISAR MODH1 Series, Инструкция по установке и эксплуатации

Страница: 2 / 22

1 General information 3
2 Safety 3
2.1 Symbols and signal words in the operating instructions 3
2.2 Personnel qualifications 3
2.3 Danger in the event of non-observance of the safety instructions 3
2.4 Safety consciousness on the job 3
2.5 Safety instructions for the operator 3
2.6 Safety instructions for installation and maintenance work 4
2.7 Unauthorised modification and manufacture of spare parts 4
2.8 Improper use 4
3 Transport and temporary storage 4
4 Intended use 5
5 Product information 5
5.1 Type key 5
5.2 Technical data 5
5.3 Scope of delivery 6
5.4 Accessories 6
6 Description of the product and accessories 6
6.1 General description 6
6.2 Components of the pressure-boosting system 7
6.3 Function of the pressure-boosting system 7
6.4 Noise 8
7 Setup/ installation 8
7.1 Installation site 8
7.2 Installation 9
7.2.1 Foundation / bearing surface 9
7.2.2 Hydraulic connection and pipes 9
7.2.3 Hygiene 9
7.2.4 Protection against dry running / low water level (accessories) 9
7.2.5 Diaphragm pressure vessel 9
7.2.6 Non-pressurised break tank (accessories) 9
7.2.7 Compensators (accessories) 10
7.2.8 Flexible connection pipes (accessories) 10
7.3 Electrical connection 10
8 Commissioning / shutdown 10
8.1 General preparations and control measures 11
8.2 Protection against low water level 11
8.3 Commissioning the system 11
8.4 Decommissioning the system 11
9 Maintenance 11
10 Faults, causes and remedies 12
11 Spare parts 15
12 Disposal 15
12.1 Oils and lubricants 15
12.2 Protective clothing 15
12.3 Information on the collection of used electrical and electronic products 15
12.4 Batteries / rechargeable batteries 15
Fig 1. Booster set general arrangement 16
Fig 1b. Discharge general arrangement 16
Fig 1c. Suction general arrangement 16
Fig 2. Hydraulic connection diagram 17
Fig 3. Electrical terminal Connection 17
Fig 4. Low water switch setting 17
Table 1. Spares list 18