Wilo ECS19-15.25, Инструкция по установке и эксплуатации

Страница: 2 / 8

WIL-IO-SP-ECS001-11 2
PREINSTALLATION CHECK
Inspect this pump before it is used. Occasionally, pumps can be damaged during shipping. If the pump or components
are deformed, cracked, or there is an oil leak, c all us Toll Free at: 866-945-6872, or e-mail: info@wilo-usa.com Monday
– Friday between 8 a.m. – 6 p.m., EST. Do not return the pump to the store. ATTEMPTING TO USE A DAMAGED PUMP
can result in personal injury or death!
1. DESCRIPTION
This Wilo submersible sump pump is designed for home sump applications. The pump is built with overload thermal
protections and auto reset. The pump is equipped with a 10’ 3-prong grounding-type power cord, and assembled with
vertical float switch. This pump operates automatically. Ball bearings on motor shafts never need lubrication. Stainless
steel pump housing, screws, cast iron volute, and non-clog reinforced thermoplastic impeller provide variety
applications including drainage flooded basements, laundry. Pump only water with this pump. This pump has not been
tested or approved for use in swimming pools or in salt-water marine areas.
Do not pump flammable or explosive liquids such as oil, gasoline, kerosene, ethanol, etc. Do not use in the
presence of flammable or explosive vapors. Using this pump with or near flammable liquids can cause
explosion or fire, resulting in serious personal injury and/or property damage.
2. SPECIFICATIONS

Power supply required............................................................ 115V, 60 HZ

Water temperature range...................................................... Max.77°F (25°C)

Individual branch circuit required ........................................ 15 Amp minimum

Discharge Connection.......................................... ................. 1-1/2” FNPT/1-1/4” FNPT (with adaptor)

Motor duty……………………………………………………………………….. Continuous

Power cord……………………………………………………………………….. SJTW, 18AWG/3C, 10ft
NOTICE: This unit is not designed to be used to pump salt water or brine! Use with salt water or brine will void
warranty.
RNING WARNING
3. CONSTRUCTION

Motor housing……………………………………………........................ Stainless Steel

Volute (Intake screen)……………………………………………………….. Cast Iron

Impeller…………………………………………………..………………………….. Reinforced thermoplastic
4. PERFORMANCE
Table 1 :
Model HP
GPM of Water @ Total Feet of Head Max. Head
0 5ft. (1.5m) 10ft. (3 m) 15ft.(4.6 m) 20 ft. (6.1 m) 24 ft. (7.3 m)
ECS24-15.50 1/2 70 67 55 38 25 0
ECS22-15.33 1/3 62 57 40 18 0 20ft(6.1m)
ECS19-15.25 1/4 57 53 38 18 0 18ft(5.3m)