WILMS Selve SE Plus RC, Руководство пользователя

Страница: 3 / 4

The SELVE SE PLUS RC is a radio-controlled motor and is used
in the following Wilms products:
• WCA0200 ZipX Sky
• WPA0600 Terrace awning
Press the SELECT button of the transmitter for 3 seconds.
When you have more than one product, you can search for the
right product by briefly pressing the SELECT button until the
right motor reacts.
1. Press the STOP button of the transmitter for 6 seconds. The
led light flashes twice.
2. Move the screen to the desired lower end position and confirm
by pressing the STOP button for 3 seconds. The movement is
interrupted once.
3. Move the screen to the desired upper end position and keep
the button pressed until the screen stops automatically.
4. The end positions are set.
5. Press the PROG button. The led light lights up green
6. Press the SELECT button for 3 seconds to complete the
installation or continue to the next screen by pressing the
SELECT button for 1 second.
RESET END POSITIONS
1. Always start by pressing the SELECT button for 3 seconds.
The motor makes a short movement.
2. Press the PROG button for 9 seconds.
3. Follow the steps for setting the end positions.
Questions?
Please contact our B2B customer service at any time.
Selve SE Plus RC
Motorisation manual
2
1
6 sec.
3
3 sec.
5 6
PROG
SELECT
3 sec.
1 sec.
1 2
PROG
SELECT
3 sec. 9 sec.