WILLTEK 4921 RF Shield, Руководство пользователя

Страница: 18 / 28

Chapter 2 Operation
Connecting the Willtek 4921 RF Shield
6
4921 RF Shield 1.00
Connecting the Willtek 4921 RF Shield
The 4921 RF Shield provides a connector for external test equipment, e.g. the
Willtek 4400 Mobile Phone tester series. Via the RF cable that comes with your
4921 RF Shield you can connect it to your measurement instrument.
Customer-specific connectors: An optional removable plate on the rear of the RF
Shield can be used to hold customer-specific connectors. For details on ordering
information refer to
“Options” on page 3 .
Installing the 4916 Antenna Coupler in the Willtek 4921 RF Shield
The Willtek 4921 RF Shield is equipped to hold the 4916 Antenna Coupler in a
defined position.
To install the 4916 Antenna Coupler in the 4921 RF Shield, proceed as follows:
1 Place the 4916 Antenna Coupler in the shield box and push it between the
clamps.
2 Move the coupler up and down between the clamps until the coupler is
tightly held and the left-hand clamp has direct contact with the coupler.
Attach the supplied cable from the 4916 Antenna Coupler to the inside of the
box and connect the RF cable. Connect the RF cable to the coupler (this cable is
already attached to the RF Shield).