Willis WMCS09MH16S, Руководство пользователя

Страница: 20 / 28

Open the front panel, remove the 4 screws and dis-
mount the front grille while pulling it forward .
Follow the procedure below when removing the slit
portions .
Front panel
Open the front panel
Remove
front grille
Casing
Front
grille
Remove 4 screws
3 tabs
For Moldings
Remove the pillars . (Remove the slit portions on the
bottom frame using nippers . )
For Side Piping
Remove the pillars .
1)Remove the 7screws .
2)Remove the upper casing (2 tabs) .
3)Remove the left and right casings (2 tabs on each
side ) .
4)Remove the slit portions on the bottom frame and
casings using nippers .
5)Return by following the steps in reverse order(3>2>
1) .
3)Side
casings
2)Upper casing
3)Side
casings
Remove the pillar Remove 7 screws
Casing
Remove the pillar
Casing
Remove the pillar
Bottom frame
Secure using 6 screws for floor installations . (Do not forget to secure to the rear wall . )
For wall installations, secure the mounting plate using 5 screws and the indoor unit using 4 screws .
Follow the arrows to disengage the clasps on the
front case to remove it .
Installing indoor unit
1.Preparation
2.Installation
17
INSTALLATION INSTRUCTIONS
Installation of indoor unit