Willis WCM18MH18S, Руководство по обслуживанию

Страница: 104 / 129

,QVWDOODWLRQDQG0DLQWHQDQFH
6HUYLFH0DQXDO
5.Remove evaporator
4.Remove electric box assy
1
2
Remove the screws of the press plate of
connecting pipe.Remove press plate of
connecting pipe.
Remove the screws of the electric box
assy.Remove the screws at the joint of
the earthing wire and evaporator.Loosen
the clasp at the joint of the electric box
cover and the electric box.Remove the 2
screws of the display.Remove the electric
box assy.
Remove the 3 screws at the joint of the
evaporator and rear case.Adjust slightly
the pipe on the evaporator.Remove the
evaporator.
evaporator
pipe clamp
display board
Procedure Steps
electric box assy
auxiliary piping