background image

7

LiFetiMe LiMited WarrantY

J.H. Williams Tool Group warrants this product to be free from defects in material and workmanship for the life of the 

product as long as the original purchaser owns the product. The warranty is non-transferable and is subject to the 

terms, exclusions, and limitations described below:
•   Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or 

couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and 

Williams will not provide any warranty credit for such damaged components.

•   This warranty does not cover ordinary wear and tear, overloading, alterations (including repairs or attempted repairs 

not performed by Williams or one of its authorized personnel), improper fluid use, or use of the product in any manner 

for which the product was not intended or the use of which is not in accordance with the instructions or warnings 

provided with the product.

•   In the unlikely event that a Williams product fails due to material defect in workmanship, you may contact J.H. 

Williams Tool Group for disposition. In such cases, the customer’s sole and exclusive remedy for any breach or 

alleged breach of warranty is limited to the repair or replacement of the defective product.

•   Under no circumstances is Williams liable for any consequential or incidental damage or loss whatsoever.

•   THIS WARRANTY IS LIMITED TO NEW PRODUCTS SOLD THROUGH AUTHORIZED DISTRIBUTORS AND 

OTHER CHANNELS DESIGNATED BY WILLIAMS. NO AGENT, EMPLOYEE OR OTHER REPRESENTATIVE 

OF WILLIAMS IS AUTHORIZED TO MODIFY THIS WARRANTY.

•   THE FOREGOING IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, 

INCLUDING  BUT  NOT  LIMITED  TO  THE  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  AND  FOR  A 

FITNESS FOR A PARTICULAR PURPOSE.

•   Components  not  manufactured  by  Williams  including  certain  motor  systems,  gasoline  engines,  and  others  are 

not covered by this warranty and instead are covered by the manufacturer’s separate manufacturer’s warranty 

provided in the package.

•   Williams’ liability in all cases is limited to, and will not exceed the purchase price paid for the product.

Содержание 3T12TV









Отзывы: