11
s
ettinG
uP
the
rX270 r
eCeiver
s
teP
1: i
nstall
the
r
eCeiver
B
atteries
Insert the rechargeable battery into the bottom of the RX270 Receiver
(see page 12). Place the receiver into the charger cradle built into the
top of the TX260 Transmitter and let charge overnight. The spare bat-
tery can be plugged into the charging port located on either side of the
transmitter. By keeping the spare battery charged, you can easily swap
batteries when the one in use runs out and always have a fresh battery
ready. A fully charged battery will operate the receiver for approxi-
mately 6 hours, depending on the volume setting. The battery should be
changed when you notice the sound getting weak and noisy. The batter-
ies may be left charging when not in use.
s
teP
2: u
sinG
the
wFM rX270 r
eCeiver
To use the system, first check to make sure your TV or audio source is
turned ON. Make sure the receiver battery is fully charged. The RX270
Receiver has an on/off switch on the rear side. Rotate the volume con-
trol to adjust the volume to a comfortable level.
Return the receiver to the charger when it is not in use.
a
dditional
r
eCeiver
a
djustMents
Balance Control:
Use a small screwdriver to adjust the loudness bal-
ance between the left and/or right earphones. See page 12.
The RX270 will work with hearing aids equipped with a T-coil.
The RX270 can be used with stereo earphones or headphones.
