manualshive.com logo in svg

Williams Sound SoundPlus, Руководство по установке и инструкция пользователя

Поделиться
Скачать
Williams Sound SoundPlus Скачать руководство пользователя страница 7

SoundPlus

®

 Infrared Listening System

7

Configuration Settings

Figure 8 illustrates how to configure your system using the DIP switches (Figure 7) located on the back of the MOD 

232 Modulator. This diagram is also printed on top of the MOD 232 Modulator unit for quick reference. 

Figure 7: Configuration Switches

CHANNEL A AND B

CONFIGURATION

SWITCHES

A252

Figure 8: DIP Switch Configuration Chart

IMPORTANT: Channel A and Channel B must be set to different frequencies!

A250

Compressor Gain

The MOD 232’s Compressor Gain is set in “Moderate” mode from the factory. Use this setting for simultaneous 

interpretation. Be sure that the compress control, located on the front of the MOD 232 (Figure 6, page 6), is turned 

fully counter-clockwise. Compression can be added if desired by turning the compress control clockwise.
For hearing assistance applications, the MOD 232’s Compressor Gain can be set to “Maximum” mode. For additional 

compression, use a tuning wand (PLT 005) or small screw driver and gently turn the compress control (Figure 6, page 

6) on the front of the MOD 232 clockwise.

Содержание SoundPlus





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды