Make sure the receiver being used is operating on the same frequency as the
T36 transmitter!
NOTE:
Up to eight T36’s can operate simultaneously on channels 1-8 (FIG. C) when
used with an R35-8 receiver.
6. Position the headset microphone boom as close to the speaker’s mouth as
possible without actually touching. Lapel clip microphones should be attached to a
collar or lapel, as close to the speaker’s mouth as possible.
The transmitter can be placed in a pocket, or clipped onto a belt or waistband.
7. When you pause from speaking, mute the microphone by pressing the “ON/OFF/
MUTE” button once momentarily. The “ON/OFF/MUTE” button will flash red. To
unmute the mic, press the “ON/OFF/MUTE” button once momentarily again.
IMPORTANT: When the T36 transmitter is not being used, turn the unit OFF by
pressing and holding the “ON/OFF/MUTE” button for three seconds. The Power
On indicator should not be lit.
FIG. B: T36 User Controls
AUXILIARY
INPUT
MIC JACK
ON/OFF, VOLUME
CONTROL SWITCH
CHANNEL
SELECTOR
POWER "ON"
INDICATOR
A203
AA
AA
–
+
+
–
❶
❷
❸
❹
Comp
CH Lock
- Gain + -
AUX
+
2:1
1:1
❶
GAIN CONTROL
❸
COMPRESSION SELECTOR
❷
AUXILIARY INPUT LEVEL
❹
CHANNEL LOCK
A204
FIG. D: Configuration Controls
FIG. C: Channel Selection Chart
T36
Ch.
Freq.
(MHz)
Letter
1
72.1
A
2
72.3
B
3
72.6
O
4
72.8
P
5
74.7
I
6
75.4
R
7
75.7
G
8
75.9
H
T36
Ch.
Freq.
(MHz)
Letter
9
72.5
C
10
72.2
K
11
72.4
N
12
72.7
D
13
72.9
E
14
75.3
J
15
75.6
S
16
75.8
T
MAN142E
