Williams Sound Personal P.A. T18, Инструкция по установке и эксплуатации

Страница: 5 / 17

Overall System Diagram
Sound System Amplifier
Loudspeakers
Microphones
Line-Level Output
FM Pocket Receivers
w/Earphones
Line-Level Input
T18 Transmitter
Receiver Set-Up & Operation
Receiver Models R7, R7-4, R16
Step 1 Install the battery: Open the battery compartment by lifting the tab at the bottom of the
receiver. Press the battery into place, observing proper battery polarity.
Step 2 Plug the earphone or headphone into the earphone jack.
Step 3 Turn the receiver on by rotating the volume control in the direction of the arrow on top of the
case. Turning the knob in the direction of the arrow will increase the volume. Turning the
knob against the arrow will decrease the volume. To avoid draining the battery, make sure the
receiver is turned off when not in use.
Step 4 If you are using the T18 with an existing sound system, make sure the sound system is turned
on. Have someone speak into a microphone while you listen with the receiver and earphone.
You should be able to hear their voice through the receiver.
If you are using the T18 with its own microphone, have someone speak into the microphone
while you listen with the receiver and earphone. You should be able to hear their voice
through the receiver.
Step 5
Page 6
The T18 Transmitter has a screwdriver-adjust input level control located on the front panel to
compensate for different input signal levels. The yellow audio indicator light should flash
with the signal. If the sound through the receiver is clear and loud and the audio indicator
light flashes with the signal, no adjustment is needed. If the sound through the receiver is
weak and the audio indicator light does not flash even with the volume control turned all the
way up, turn the T18 input level control clockwise to increase the signal. If the sound is loud,
distorted, or broken up, and the audio indicator light is continuously on, turn the input level
control counterclockwise to decrease the signal.